Deep hole drilling and boring machine T2116
The machine is specialized in machining cylindrical deep-hole workpieces, such as spindle holes for machine tools, various mechanical hydraulic cylinders, cylindrical through-holes for cylinders, blind holes and stepped holes. The processing accuracy can reach IT7~IT8 or above, and the surface roughness can reach Ra0.4¦Ìm. The machine tool can not only undertake drilling and boring, but also can perform burnishing , and the internal chip removal (BTA)method is used for drilling. The machine bed is rigid and has excellent precision. The spindle has a wide range of speeds, and the feed system is driven by an AC servo motor, which can adapt to the needs of various deep hole machining processes. The pressure head is fastened and the workpiece is tightly clamped with hydraulic device. The instrument display is safe, stable and reliable. The workpiece has high precision, low waste rate, high efficiency and excellent quality. The adjustment speed is simple and quick, the motor power is small, the cost is low, and the investment is small, which can replace the special machine function
Main technical specifications and performance:
SPECIFICATION
|
TECHNICAL DATE
|
T2116B
|
CAPACITY
|
Maximum boring diameter
|
` Boring diameter
|
¦Õ160mm
|
Drilling diameter range
|
Max drilling depth
|
¦Õ40mm-¦Õ80mm
|
Maximum boring depth
|
Max.boring depth
|
1000-8000mm
|
Workpiece clamping diameter range
|
Workpiece clamped dia.range
|
¦Õ60mm ¨C¦Õ260mm
|
SPINDLE
|
Spindle center height
|
Height from spindle center to bed
|
320mm
|
Diameter of main shaft of drill pipe box
|
Spindle bord diameter
|
¦Õ65mm
|
Front end taper hole of spindle
|
Taper of spindle bore
|
85mm 1:20
|
Spindle speed range
|
Range of spindle bore
|
200-600r/min stepless
|
FEEDS
|
Feed speed range (stepless)
|
Feed speed range(infinte)
|
5-600mm/min stepless
|
늙C
MOTORS
|
Main motor power
|
Main motor poser
|
7.5KW n=1440r/min
|
Motor power of hydraulic pump
|
Hydraulic pump motor power
|
1.5KW n=1440r/min
|
Feed motor power
|
Feed motor power
|
3.7KWAC servo
|
Cooling pump motor power
|
Cool pump motor power
|
4KW n=960r/min
|
OTHERS
|
Rated pressure of cooling system
|
Rated prdssure for cooling system
|
0.36Mpa
|
Cooling system flow
|
Flow of cooling system
|
200L/min
|
Rated working pressure of hydraulic system
|
Rated working pressure for hydraulic system
|
6.3Mpa
|
Maximum axial force on the pressure head
|
Max.axial force for carriage support
|
68KN
|
Maximum force of the pressure head on the workpiece
|
Max.clamping force exalted by carriage on workpiece
|
20KN
|